A uniform ring of conducting wire of radius r | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The total resistance of the ring is $R$. The ring is divided into two parts by points $A$ and $B$. The length of the arc corresponding to angle $\

Vedclass · Accepted Answer

$\frac{R 	heta (2 \pi - 	heta)}{4 \pi^2}$

Vedclass · Answer

(D) The total resistance of the ring is $R$. The ring is divided into two parts by points $A$ and $B$. The length of the arc corresponding to angle $	heta$ is $l_1 = r	heta$,and the length of the remaining arc is $l_2 = r(2\pi - 	heta)$. Since the resistance is proportional to the length,the resistances of the two parts are: $R_1 = R \left(\frac{	heta}{2\pi}ight)$ and $R_2 = R \left(\frac{2\pi - 	heta}{2\pi}ight)$. These two parts are connected in parallel between points $A$ and $B$. The equivalent resistance $R_{eq}$ is given by: $R_{eq} = \frac{R_1 R_2}{R_1 + R_2} = \frac{\left(R \frac{	heta}{2\pi}ight) \left(R \frac{2\pi - 	heta}{2\pi}ight)}{R \left(\frac{	heta}{2\pi} + \frac{2\pi - 	heta}{2\pi}ight)}$ $R_{eq} = \frac{R^2 	heta (2\pi - 	heta) / 4\pi^2}{R (2\pi / 2\pi)} = \frac{R 	heta (2\pi - 	heta)}{4\pi^2}$.

$A$ uniform ring of conducting wire of radius $r$ has resistance $R$. $A$ and $B$ are two points on the ring which subtend an angle $\theta$ at the centre of the ring. The equivalent resistance between points $A$ and $B$ is:

Similar Questions

$A$ current of $15\,mA$ flows in the circuit as shown in the figure. The value of the potential difference between the points $A$ and $B$ will be $...\,V$.

The equivalent resistance of the circuit shown in the figure is ............. $\Omega$

$A$ uniform conductor of resistance $R$ is cut into $20$ equal pieces. Half of them are joined in series and the remaining half of them are connected in parallel. If the two combinations are joined in series,the effective resistance of all the pieces is

In the given circuit,the equivalent resistance between the terminals $A$ and $B$ is $........\Omega$.

By using only two resistance coils—singly,in series,or in parallel—one should be able to obtain resistances of $3$,$4$,$12$,and $16\,\Omega$. The separate resistances of the coils are:

Vedclass Test Series

Exam Paper Generator

Online Exam Module