A van is moving with a speed of 108 ,km/hr on | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The correct option is $B$.Concept: For safe driving on a level road, the centripetal force required for turning must be provided by the static fri

Vedclass · Accepted Answer

$180$

Vedclass · Answer

(B) The correct option is $B$.Concept: For safe driving on a level road, the centripetal force required for turning must be provided by the static friction between the tyres and the road. If the centripetal force exceeds the maximum limiting friction, the vehicle will skid.Mathematically, the condition for safe turning is $\frac{mv^2}{r} \leq \mu mg$.Given: Velocity $v = 108 \,km/hr = 108 	imes \frac{5}{18} \,m/s = 30 \,m/s$, coefficient of friction $\mu = 0.5$, and $g = 10 \,m/s^2$.To find the minimum radius $r_{\min}$, we use the equality condition: $r_{\min} = \frac{v^2}{\mu g}$.Substituting the values: $r_{\min} = \frac{30^2}{0.5 	imes 10} = \frac{900}{5} = 180 \,m$.

$A$ van is moving with a speed of $108 \,km/hr$ on a level road where the coefficient of friction between the tyres and the road is $0.5$. For the safe driving of the van, the minimum radius of curvature of the road shall be (Acceleration due to gravity, $g = 10 \,m/s^2$) (in $\,m$)

Similar Questions

$A$ bead of mass $m$ stays at point $P(a, b)$ on a wire bent in the shape of a parabola $y = 4Cx^2$ and rotating with angular speed $\omega$ (see figure). The value of $\omega$ is (neglect friction).

$A$ car of mass $m$ is moving on a level circular track of radius $R.$ If $\mu_s$ represents the static friction between the road and tyres of the car,the maximum speed of the car in circular motion is given by

The distance between the two tires of a car is $1.5 \, m$. The center of mass of the car is at a height of $2 \, m$ from the ground. To take a turn on a road with a radius of $120 \, m$,the speed of the car should be ........ $m/s$.

$A$ car of mass $800 \, kg$ moves on a circular track of radius $40 \, m$. If the coefficient of friction is $0.5$,then the maximum velocity with which the car can move is ......... $m/s$.

The maximum velocity (in $m/s$) with which a car driver must traverse a flat curve of radius $150 \, m$ and coefficient of friction $0.6$ to avoid skidding is

Vedclass Test Series

Exam Paper Generator

Online Exam Module