$A$ metal rod of length $L$ and cross-sectional area $A$ is heated through $T^{\circ} C$. What is the force required to prevent the expansion of the rod lengthwise? ($Y=$ Young's modulus of the material of the rod,$\alpha=$ coefficient of linear expansion of the rod.)

The ratio of diameters of two wires of the same material is $n : 1$. The length of each wire is $4 \ m$. On applying the same load,the increase in length of the thin wire will be:

$A$ rod of uniform cross-sectional area $A$ and length $L$ has a weight $W$. It is suspended vertically from a fixed support. If Young's modulus for the rod is $Y$,then the elongation produced in the rod due to its own weight is:

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)

$A$ uniform rod of mass $m$,length $L$,area of cross-section $A$ and Young's modulus $Y$ hangs from the ceiling. Its elongation under its own weight will be

Two wires made of the same material are clamped rigidly at one end and pulled by the same force on the other end. The length and the radius of the first wire are three times those of the second wire. If $x$ is the increase in the length of the first wire,then the increase in the length of the second wire is