I-V characteristic of a copper wire of length | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The $I-V$ characteristic of a copper wire of length $L$ and area of cross-section $A$ is shown in the figure.Since the $I-V$ characteristic is a s

Vedclass · Accepted Answer

Less if the length of the wire is increased

Vedclass · Answer

(D) The $I-V$ characteristic of a copper wire of length $L$ and area of cross-section $A$ is shown in the figure.Since the $I-V$ characteristic is a straight line,it obeys Ohm's law.The slope of the $I-V$ graph is given by $	ext{slope} = 	an 	heta = \frac{I}{V}$.From Ohm's law,$V = IR$,so $\frac{I}{V} = \frac{1}{R}$.Since $R = ho \frac{L}{A}$,we have $	ext{slope} = \frac{1}{ho \frac{L}{A}} = \frac{A}{ho L}$.$(i)$ If the length $L$ is increased,the slope $\frac{A}{ho L}$ decreases.(ii) If the area $A$ is increased,the slope $\frac{A}{ho L}$ increases.(iii) If a steel wire of the same dimensions is used,since $ho_{	ext{steel}} > ho_{	ext{copper}}$,the slope $\frac{A}{ho L}$ decreases.(iv) If the experiment is performed at a higher temperature,the resistivity $ho$ of copper increases,so the slope $\frac{A}{ho L}$ decreases.Therefore,the correct statement is that the slope becomes less if the length of the wire is increased.

$I-V$ characteristic of a copper wire of length $L$ and area of cross-section $A$ is shown in the figure. The slope of the curve becomes

Similar Questions

Of the following graphs,the one that correctly represents the $I-V$ characteristics of an 'Ohmic device' is:

The current flowing through a circuit is shown in the figure. What is the resistance of the circuit?

The current-voltage $(I-V)$ graphs for a given metallic wire at two different temperatures $T_1$ and $T_2$ are shown in the figure. The temperatures $T_1$ and $T_2$ are related as

The variation of current $(i)$ passing through a conductor as the voltage $(V)$ applied across its ends is varied is shown in the adjoining diagram. If the resistance $(R)$ is determined at the points $A, B, C$ and $D$,we will find that

State and explain Ohm's law.

Vedclass Test Series

Exam Paper Generator

Online Exam Module