A 3 m long steel wire is stretched to increa | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) Length of steel wire,$l = 3 \ m$. Increased length,$\Delta l = 0.3 \ cm = 0.3 	imes 10^{-2} \ m = 3 	imes 10^{-3} \ m$. Poisson's ratio $(\sigma

Vedclass · Accepted Answer

$0.26 	imes 10^{-3}$

Vedclass · Answer

(C) Length of steel wire,$l = 3 \ m$. Increased length,$\Delta l = 0.3 \ cm = 0.3 	imes 10^{-2} \ m = 3 	imes 10^{-3} \ m$. Poisson's ratio $(\sigma)$ $= 0.26$. By definition,Poisson's ratio is the ratio of lateral strain to longitudinal strain: $\sigma = \frac{	ext{Lateral strain}}{	ext{Longitudinal strain}} = 0.26$. Longitudinal strain $= \frac{\Delta l}{l} = \frac{3 	imes 10^{-3} \ m}{3 \ m} = 10^{-3}$. Therefore,Lateral strain $= 0.26 	imes 	ext{Longitudinal strain} = 0.26 	imes 10^{-3}$.

$A 3 \ m$ long steel wire is stretched to increase its length by $0.3 \ cm$. Poisson's ratio for steel is $0.26$. The lateral strain produced in the wire is

Similar Questions

If $Y, K$ and $\eta$ are the values of Young's modulus,bulk modulus,and modulus of rigidity of any material respectively,choose the correct relation for these parameters.

For a homogeneous isotropic material, which one of the following cannot be the value of Poisson’s ratio?

When a wire of length $10 \ m$ is subjected to a force of $100 \ N$ along its length, the lateral strain produced is $0.01 \times 10^{-3} \ m$. The Poisson's ratio was found to be $0.4$. If the area of cross-section of the wire is $0.025 \ m^2$, its Young's modulus is:

The increase in length on stretching a wire is $0.05\%$. If its Poisson's ratio is $0.4$,then its diameter

The minimum and maximum values of Poisson's ratio for a metal lie between

Vedclass Test Series

Exam Paper Generator

Online Exam Module