$A$ metal wire with circular cross-section and length $1 \,m$ is pulled with a tensile force of $1000 \,N$ on each side. For the wire to be stretched not more than $0.25 \,cm$, the minimum diameter of the wire required is (Young's modulus of the metal $= 10^{11} \,Pa$, take $\sqrt{\pi} = 1.77$). (in $\,mm$)

$A$ steel wire of length $L$ at $40^{\circ}C$ is suspended from the ceiling and then a mass $m$ is hung from its free end. The wire is cooled down from $40^{\circ}C$ to $30^{\circ}C$ to regain its original length $L$. The coefficient of linear thermal expansion of the steel is $10^{-5} /^{\circ}C$,Young's modulus of steel is $10^{11} N/m^2$,and the radius of the wire is $1 mm$. Assume that $L \gg$ diameter of the wire. Then the value of $m$ in $kg$ is nearly:

There are two wires of the same material and same length. If the diameter of the second wire is two times the diameter of the first wire,then the ratio of the extension produced in the wires by applying the same load will be:

$A$ rigid bar of mass $15 \, kg$ is supported symmetrically by three wires,each $2 \, m$ long. The wires at each end are made of copper,and the middle one is made of steel. The Young's modulus of elasticity for copper and steel are $110 \times 10^9 \, N/m^2$ and $190 \times 10^9 \, N/m^2$ respectively. If each wire is to have the same tension,the ratio of their diameters (diameter of copper wire to diameter of steel wire) will be ............

What is the effect of change in temperature on the Young's modulus?

Two persons pull a wire towards themselves. Each person exerts a force of $200 \, N$ on the wire. Young's modulus of the material of the wire is $1 \times 10^{11} \, N \, m^{-2}$. The original length of the wire is $2 \, m$ and the area of cross-section is $2 \, cm^2$. The wire will extend in length by $...... \, \mu m$.