A force F is needed to break a copper wire ha | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The breaking force of a wire is determined by its breaking stress,which is a material property. The breaking force $F$ is given by the product of

Vedclass · Accepted Answer

$4F$

Vedclass · Answer

(C) The breaking force of a wire is determined by its breaking stress,which is a material property. The breaking force $F$ is given by the product of breaking stress $\sigma$ and the cross-sectional area $A$ of the wire.$F = \sigma 	imes A = \sigma 	imes (\pi R^2)$Since the material is the same (copper),the breaking stress $\sigma$ remains constant.Therefore,$F \propto R^2$.If $F_1 = F$ for radius $R_1 = R$,and $F_2$ is the force for radius $R_2 = 2R$,then:$\frac{F_2}{F_1} = \left(\frac{R_2}{R_1}ight)^2 = \left(\frac{2R}{R}ight)^2 = 4$$F_2 = 4F_1 = 4F$.

$A$ force $F$ is needed to break a copper wire having radius $R$. The force needed to break a copper wire of radius $2R$ will be

Similar Questions

What is strain? Give its units. Define longitudinal stress.

The length of a metal wire is $l_1$ when the tension in it is $F_1$ and $l_2$ when the tension is $F_2$. Then,the original length of the wire is

Two identical solid balls,one of ivory and the other of wet-clay,are dropped from the same height on the floor. Which one will rise to a greater height after striking the floor and why?

$A$ steel cable with a radius of $1.5 \; cm$ supports a chairlift at a ski area. If the maximum stress is not to exceed $10^{8} \; N m^{-2}$,what is the maximum load the cable can support?

The spring balance does not read properly after its long use,because

Vedclass Test Series

Exam Paper Generator

Online Exam Module