A message signal is used to modulate a carrie | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Given: Carrier frequency $f_c = 5 MHz$,carrier peak voltage $V_c = 40 V$,modulation index $\mu = 0.75$.$1$. Calculation of message signal peak vol

Vedclass · Accepted Answer

$30 V ; 20 kHz$

Vedclass · Answer

(D) Given: Carrier frequency $f_c = 5 MHz$,carrier peak voltage $V_c = 40 V$,modulation index $\mu = 0.75$.$1$. Calculation of message signal peak voltage $(V_m)$:The modulation index is defined as $\mu = \frac{V_m}{V_c}$.Substituting the values: $0.75 = \frac{V_m}{40 V}$.$V_m = 40 V 	imes 0.75 = 30 V$.$2$. Calculation of message signal frequency $(f_m)$:The frequency separation between the two side-bands (upper side-band and lower side-band) is equal to the bandwidth,which is $2 f_m$.Given: $2 f_m = 40 kHz$.$f_m = \frac{40 kHz}{2} = 20 kHz$.Therefore,the peak voltage and frequency of the message signal are $30 V$ and $20 kHz$ respectively.

$A$ message signal is used to modulate a carrier signal of frequency $5 MHz$ and peak voltage of $40 V$. In the process,two side-bands are produced separated by $40 kHz$. If the modulation index is $0.75$,then the peak voltage and frequency of the message signal,respectively,are:

Similar Questions

The mathematical form of an $AM$ wave is given by $e = 50 (1 + 0.5 \sin (2\pi \times 5 \times 10^{3}) t) \sin (31.4 \times 10^{6}) t \, V$. To generate this $AM$ wave,the amplitudes of the carrier wave and the modulating wave must be,respectively,....... and ....... .

If the maximum and minimum amplitudes of a modulated wave are $25 \ V$ and $5 \ V$ respectively,then the modulation index is

In a communication system operating at a wavelength of $800\,nm,$ only one percent of the source frequency is available as signal bandwidth. The number of channels accommodated for transmitting $TV$ signals of bandwidth $6\,MHz$ is (Take velocity of light $c = 3 \times 10^8\,m/s$)

An amplitude modulated wave is represented by $C_{m}(t)=10(1+0.2 \cos 12560 t) \sin (111 \times 10^{4} t)$ volts. The modulating frequency in $kHz$ will be ........... .

The waves used for line-of-sight $(LOS)$ communication are

Vedclass Test Series

Exam Paper Generator

Online Exam Module