$A$ voltmeter of $250 mV$ range having a resistance of $10 \Omega$ is converted into an ammeter of $250 mA$ range. The value of the necessary shunt is (nearly): (in $\Omega$)

The sensitivity of a moving coil galvanometer is inversely proportional to

There are three voltmeters of the same range but of resistances $10000\,\Omega$,$8000\,\Omega$,and $4000\,\Omega$ respectively. The best voltmeter among these is the one whose resistance is ................ $\Omega$.

$A$ galvanometer of resistance $G$ is shunted by a resistance $S$. To keep the main current in the circuit unchanged,what value of resistance should be connected in series with the galvanometer?

The scale of a galvanometer is divided into $25$ equal divisions. The resistance of the galvanometer is $100 \,\Omega$. The current sensitivity of the galvanometer is $4 \times 10^{-4} \,A/div$. What resistance in $ohm$ must be connected in series to measure $2.5 \,V$?

In the experiment to determine the galvanometer resistance by the half-deflection method,the plot of $\frac{1}{\theta}$ vs the resistance $(R)$ of the resistance box is shown in the figure. The figure of merit of the galvanometer is .............. $\times 10^{-1} \text{ A/division}$. [The source has emf $E = 2 \text{ V}$]