$A$ rectangular coil of $400$ turns and $10^{-2} \ m^2$ area, carrying a current of $0.5 \ A$ is placed in a uniform magnetic field of $1 \ T$ such that the plane of the coil makes an angle of $60^{\circ}$ with the direction of the magnetic field. The initial moment of force acting on the coil in $Nm$ is

The torque acting on a coil carrying current '$I$',having '$n$' turns and area '$A$',situated parallel to a magnetic field of induction '$B$' is:

$A$ small coil $C$ with $N = 200$ turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in the figure. The cross-sectional area of the coil is $A = 1.0 \, cm^2$,and the length of the arm $OA$ of the balance beam is $l = 30 \, cm$. When there is no current in the coil,the balance is in equilibrium. On passing a current $I = 22 \, mA$ through the coil,the equilibrium is restored by putting an additional counterweight of mass $\Delta m = 60 \, mg$ on the balance pan. Find the magnetic induction $B$ at the spot where the coil is located. (in $, T$)

$A$ thin non-conducting disc of radius $R$ is rotating clockwise (see figure) with an angular velocity $\omega$ about its central axis,which is perpendicular to its plane. Both its surfaces carry positive charges of uniform surface density. Half the disc is in a region of a uniform,unidirectional magnetic field $B$ parallel to the plane of the disc,as shown. Then,

$A$ metallic loop is placed in a magnetic field. If a current is passed through it,then

The torque required to hold a small circular coil of $10$ turns, area $1 \,mm^{2}$ and carrying a current of $\left(\frac{21}{44}\right) \,A$ in the middle of a long solenoid of $10^{3} \,turns/m$ carrying a current of $2.5 \,A$, with its axis perpendicular to the axis of the solenoid is