$A$ steel rod has a radius of $50 \ mm$ and a length of $2 \ m$. It is stretched along its length with a force of $400 \ kN$. This causes an elongation of $0.5 \ mm$. Find the (approximate) Young's modulus of steel from this information.

One end of a uniform wire of length $L$ and of weight $W$ is attached rigidly to a point in the roof and a weight $W_1$ is suspended from its lower end. If $A$ is the area of cross-section of the wire,the stress in the wire at a height $3L/4$ from its lower end is

$A$ $500 \,g$ ball is attached to one end of an aluminum wire of area of cross-section $0.5 \,mm^2$ and an unstretched length of $1.4 \,m$. The other end of the wire is fixed to the top of a vertical pole. The ball rotates about the pole in a horizontal plane such that the angle between the wire and the horizontal is $30^{\circ}$. The increase in the length of the wire is . . . . . . $mm$. (Young's modulus of aluminum $= 0.7 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)

The cross-sectional area of all wires is $10^{-4} \ m^2$. What is the displacement of point $D$?

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be:

$A$ metallic rod having area of cross-section $A$,Young's modulus $Y$,coefficient of linear expansion $\alpha$,and length $L$ is tied between two strong pillars. If the rod is heated through a temperature $t \, ^\circ C$,then how much force is produced in the rod?