$A$ slab of stone of area $3600 \, cm^2$ and thickness $10 \, cm$ is exposed on the lower surface to steam at $100^{\circ} C$. $A$ block of ice at $0^{\circ} C$ rests on the upper surface of the slab. In one hour, $4.8 \, kg$ of ice is melted. The thermal conductivity of the stone in $J \, s^{-1} \, m^{-1} \, K^{-1}$ is (Latent heat of ice $= 3.36 \times 10^5 \, J/kg$)

Three metal rods made of copper, brass, and steel, each with a cross-sectional area of $4 \,cm^2$, are joined as shown in the figure. Their lengths are $46 \,cm, 13 \,cm$, and $12 \,cm$ respectively. Their coefficients of thermal conductivity are $0.92, 0.26$, and $0.12$ respectively, all in $CGS$ units. The rods are thermally insulated from the surroundings except at the ends. The rate of flow of heat through the copper rod, in $cal \,s^{-1}$, is:

Two thin metallic spherical shells of radii $20 \text{ cm}$ and $30 \text{ cm}$, respectively, are placed with their centers coinciding. $A$ material of thermal conductivity $\alpha$ is filled in the space between the shells. The inner shell is maintained at $300 \text{ K}$ and the outer shell at $310 \text{ K}$. If the rate at which heat flows radially through the material is $40 \text{ W}$, find the value of $\alpha$ (in units of $\text{J s}^{-1} \text{ m}^{-1} \text{ K}^{-1}$).

Dimensional formula for thermal conductivity is (here $K$ denotes the temperature)

On which factor does the thermal conductivity depend?

Three identical heat conducting rods are connected in series as shown in the figure. The rods on the sides have thermal conductivity $2K$ while that in the middle has thermal conductivity $K$. The left end of the combination is maintained at temperature $3T$ and the right end at $T$. The rods are thermally insulated from outside. In steady state,the temperature at the left junction is $T_1$ and that at the right junction is $T_2$. The ratio $T_1 / T_2$ is