A Zener diode having breakdown voltage V_z = | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The voltage across the series resistor $R_s$ is given by $V_{R_s} = V_{in} - V_z = 10 \, V - 6 \, V = 4 \, V$.For the Zener diode to act as a volt

Vedclass · Accepted Answer

$400$

Vedclass · Answer

(B) The voltage across the series resistor $R_s$ is given by $V_{R_s} = V_{in} - V_z = 10 \, V - 6 \, V = 4 \, V$.For the Zener diode to act as a voltage regulator, it must maintain a minimum current $I_{z,min} = 10 \, mA$ even when the load current $I_L$ is zero.The total current $I$ flowing through $R_s$ is $I = I_z + I_L$.To find the maximum value of $R_s$, we consider the condition where the load current $I_L$ is minimum (i.e., $I_L = 0$).Thus, $I = I_{z,min} = 10 \, mA$.Using Ohm's law, $R_s = \frac{V_{R_s}}{I} = \frac{4 \, V}{10 \, mA} = \frac{4 \, V}{10 	imes 10^{-3} \, A} = 400 \, \Omega$.Therefore, the maximum value of $R_s$ is $400 \, \Omega$.

Similar Questions

Consider the following statements $(A)$ and $(B)$ and identify the correct answer.
$(A)$ $A$ Zener diode is connected in reverse bias when used as a voltage regulator.
$(B)$ The potential barrier of a $p-n$ junction typically lies between $0.1 \, V$ to $0.3 \, V$.

$A$ Zener diode with a breakdown voltage of $15 \ V$ is used as a voltage regulator. In the circuit shown,the current flowing through the Zener diode is ...... $mA$.

$A$ $5.0 \, V$ stabilized power supply is required to be designed using a $12 \, V$ $DC$ power supply as an input source. The maximum power rating of the zener diode is $2.0 \, W$. The minimum value of resistance $R_{s}$ in $\Omega$ connected in series with the zener diode will be (in $.5$)

Write a short note on a Zener diode.

In the following circuit,the power dissipated in the Zener diode is (in $W$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module