$A$ thin uniform rod $AB$ of mass $m$ and length $l$ is hinged at one end $A$ to the ground level. Initially, the rod stands vertically and is allowed to fall freely to the ground in the vertical plane. The angular velocity of the rod when its $B$ end strikes the ground is $(g = \text{acceleration due to gravity})$

$A$ constant power is supplied to a rotating disc. The angular velocity $(\omega)$ of the disc varies with the number of rotations $(n)$ made by the disc as:

$A$ wheel is rotating with an angular speed of $20\ rad/s$. It is stopped to rest by applying a constant torque in $4\ s$. If the moment of inertia of the wheel about its axis is $0.20\ kg\cdot m^2$,then the work done by the torque in two seconds will be .......... $J$.

$A$ circular disc of radius $R$ meter and mass $M$ kg is rotating around the axis perpendicular to the disc. An external torque is applied to the disc such that $\theta(t) = 5t^2 - 8t$,where $\theta(t)$ is the angular position of the rotating disc as a function of time $t$. How much power is delivered by the applied torque,when $t = 2$ s (in $MR^2$)?

$A$ thin rod of length $L$ and mass $M$ is held vertically with one end on the floor and is allowed to fall. Find the velocity of the other end when it hits the floor,assuming that the end on the floor does not slip.

$A$ cord of negligible mass is wound around the rim of a wheel supported by spokes with negligible mass. The mass of the wheel is $10 \ kg$ and the radius is $10 \ cm$. It can rotate freely without any friction. Initially,the wheel is at rest. If a steady pull of $20 \ N$ is applied on the cord,the angular velocity (in $rad/s$) of the wheel,after the cord is unwound by $1 \ m$,would be: