A thin square plate of side 4R has a mass M. | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The mass per unit area of the square plate is $\sigma = \frac{M}{(4R)^2} = \frac{M}{16R^2}$.The mass of one circular disc of radius $R$ is $m = \s

Vedclass · Accepted Answer

$\left[ \frac{8}{3} - \frac{10\pi}{16} \right] MR^2$

Vedclass · Answer

(B) The mass per unit area of the square plate is $\sigma = \frac{M}{(4R)^2} = \frac{M}{16R^2}$.The mass of one circular disc of radius $R$ is $m = \sigma (\pi R^2) = \frac{M}{16R^2} \cdot \pi R^2 = \frac{\pi M}{16}$.The moment of inertia of the original square plate about the $z$-axis (passing through the center) is $I_{square} = \frac{M}{12} (a^2 + a^2) = \frac{M}{12} ((4R)^2 + (4R)^2) = \frac{M}{12} (32R^2) = \frac{8}{3} MR^2$.Each circular hole has its center at a distance $d = \sqrt{2}R$ from the center of the square. Using the parallel axis theorem,the moment of inertia of one hole about the $z$-axis is $I_{hole} = I_{cm} + md^2 = \frac{mR^2}{2} + m(\sqrt{2}R)^2 = \frac{mR^2}{2} + 2mR^2 = \frac{5}{2} mR^2$.The moment of inertia of the remaining part is $I = I_{square} - 4 I_{hole} = \frac{8}{3} MR^2 - 4 \left( \frac{5}{2} mR^2 \right) = \frac{8}{3} MR^2 - 10 mR^2$.Substituting $m = \frac{\pi M}{16}$,we get $I = \frac{8}{3} MR^2 - 10 \left( \frac{\pi M}{16} \right) R^2 = \left[ \frac{8}{3} - \frac{10\pi}{16} \right] MR^2$.

$A$ thin square plate of side $4R$ has a mass $M$. Four circles of radius $R$ are cut from it as shown. Calculate the moment of inertia of the remaining part about the $z$-axis passing through the center of the square.

Similar Questions

$A$ solid sphere of radius $R$ has mass $M$. The moment of inertia of the solid sphere about an axis at a distance $\frac{R}{2}$ from the centre is:

According to the parallel axis theorem,$I = I_C + Mx^2$. Which of the following graphs of $I$ versus $x$ is correct?

The moment of inertia of a thin circular disc about an axis passing through its centre and perpendicular to its plane is $I$. Then, the moment of inertia of the disc about an axis parallel to its diameter and touching the edge of the rim is

Vedclass Test Series

Exam Paper Generator

Online Exam Module