Consider the four circuits shown below. In wh | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The power dissipated in a circuit is given by $P = \frac{E^2}{R_{eq}}$,where $E$ is the $EMF$ of the source and $R_{eq}$ is the equivalent resista

Vedclass · Accepted Answer

Vedclass · Answer

(A) The power dissipated in a circuit is given by $P = \frac{E^2}{R_{eq}}$,where $E$ is the $EMF$ of the source and $R_{eq}$ is the equivalent resistance of the circuit. To maximize power $P$,we need to minimize the equivalent resistance $R_{eq}$.For circuit $A$: Two resistors $R$ are in parallel. $R_{eq,A} = \frac{R \cdot R}{R + R} = \frac{R}{2} = 0.5R$.For circuit $B$: Two resistors $R$ are in series. $R_{eq,B} = R + R = 2R$.For circuit $C$: Two resistors $R$ are in parallel,and this combination is in series with another resistor $R$. $R_{eq,C} = \frac{R}{2} + R = 1.5R$.For circuit $D$: Two resistors $R$ are in series,and this combination is in parallel with another resistor $R$. $R_{eq,D} = \frac{(2R) \cdot R}{2R + R} = \frac{2R^2}{3R} = \frac{2}{3}R \approx 0.67R$.Comparing the equivalent resistances: $R_{eq,A} (0.5R) Since circuit $A$ has the minimum equivalent resistance,it will dissipate the maximum power.

Consider the four circuits shown below. In which circuit is the power dissipated the maximum? (Neglect the internal resistance of the applied power source $E$)

Similar Questions

For a given temperature difference,which of the following pairs will generate maximum thermo $e.m.f.$?

For ensuring the dissipation of the same energy in all three resistors $({R_1}, {R_2}, {R_3})$ connected as shown in the figure,their values must be related as:

Two different metals are joined end to end. One end is kept at a constant temperature and the other end is heated to a very high temperature. The graph depicting the thermo $e.m.f.$ $(E)$ versus temperature $(t)$ is:

In the circuit shown in the figure,find the current through the $4\,\Omega$ resistor.

The thermo emf of a hypothetical thermocouple varies with the temperature $\theta$ of the hot junction as $E = a\theta + b\theta^2$ in volts,where the ratio $a/b$ is $700^{\circ}C$. If the cold junction is kept at $0^{\circ}C$,then the neutral temperature is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module