The amount of oxalic acid in a solution can be determined by titration with $KMnO_4$ in the presence of $H_2SO_4$. If the titration is performed in the presence of $HCl$,the results are unsatisfactory because $HCl$ ...

$0.4 \ g$ mixture of $NaOH, Na_{2}CO_{3}$ and some inert impurities was first titrated with $\frac{N}{10} \ HCl$ using phenolphthalein as an indicator,$17.5 \ mL$ of $HCl$ was required at the end point. After this,methyl orange was added and titrated. $1.5 \ mL$ of same $HCl$ was required for the next end point. The weight percentage of $Na_{2}CO_{3}$ in the mixture is .......... (Rounded-off to the nearest integer)

The indicator used in the titration of $Na_2CO_3$ with $H_2SO_4$ is

Given below are two statements :
Statement $I$ : Potassium hydrogen phthalate is a primary standard for standardisation of sodium hydroxide solution.
Statement $II$ : In this titration,phenolphthalein can be used as an indicator.
In the light of the above statements,choose the most appropriate answer from the options given below:

Temporary hardness in tap water is measured in terms of parts of $CaCO_3$ per $10^6$ parts of water. If $500 \ mL$ of hard water containing $Ca(HCO_3)_2$ was titrated against $\frac{1}{20} \ M \ H_2SO_4$ solution in the presence of a methyl orange indicator,and it required $40 \ mL$ of titrant,then the temporary hardness in the tap water is .............. $ppm$.

In the titration of $Na_2CO_3$ with $HCl$ using phenolphthalein as an indicator,what will be the result?