A constant voltage is applied between the two | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The heat developed in a wire is given by the formula $H = \frac{V^2}{R} t$,where $V$ is the constant voltage,$R$ is the resistance,and $t$ is the

Vedclass · Accepted Answer

both the length and the radius of the wire are doubled.

Vedclass · Answer

(B) The heat developed in a wire is given by the formula $H = \frac{V^2}{R} t$,where $V$ is the constant voltage,$R$ is the resistance,and $t$ is the time.For the heat $H$ to be doubled,the resistance $R$ must be halved.The resistance of a wire is given by $R = \rho \frac{l}{A} = \rho \frac{l}{\pi r^2}$,where $l$ is the length and $r$ is the radius.If both the length $l$ and the radius $r$ are doubled ($l' = 2l$ and $r' = 2r$),the new resistance $R'$ becomes:$R' = \rho \frac{2l}{\pi (2r)^2} = \rho \frac{2l}{4\pi r^2} = \frac{1}{2} \left( \rho \frac{l}{\pi r^2} \right) = \frac{R}{2}$.Since the resistance $R$ is halved,the heat developed $H$ will be doubled.

$A$ constant voltage is applied between the two ends of a uniform metallic wire. Some heat is developed in it. The heat developed is doubled if

Similar Questions

The resistances in the following circuit are $R_1 = R_2 = R_3 = 6.0 \ \Omega$. The emf of the battery is $12 \ V$. When switch $S$ is closed, the potential across resistance $R_1$ changes by an amount:

Current $I$ is flowing through two materials having electrical conductivities $\sigma_1$ and $\sigma_2$ respectively $(\sigma_1 > \sigma_2)$ as shown in the figure. The total amount of charge at the junction of the materials is

Consider the four circuits shown in the figure given below. In which circuit is the power dissipated the greatest? (Neglect the internal resistance of the power supply)

In the circuit shown in the figure, the ammeter and voltmeter are ideal. What would be the reading of the voltmeter in $volt$?

In the circuit given, $E = 6.0 \, V$, $R_1 = 100 \, \Omega$, $R_2 = R_3 = 50 \, \Omega$, and $R_4 = 75 \, \Omega$. The equivalent resistance of the circuit, in $\Omega$, is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module