$A$ galvanometer may be converted into an ammeter or a voltmeter. In which of the following cases will the resistance of the device be the largest? (Assume the maximum range of the galvanometer is $1 \, mA$)

The sensitivity of a galvanometer is $60 \text{ division/A}$. When a shunt is used,its sensitivity becomes $10 \text{ division/A}$. If the galvanometer is of resistance $20 \ \Omega$,the value of shunt used is (in $\Omega$)

Which one of the following modifications may increase the sensitivity of a moving coil galvanometer?
$1^{st}$ Way: By using a spring of smaller torsion constant.
$2^{nd}$ Way: By using a smaller coil.
$3^{rd}$ Way: By using a stronger magnet.
$4^{th}$ Way: By using a coil having fewer number of turns.

$A$ teacher in his physics laboratory allotted an experiment to determine the resistance $(G)$ of a galvanometer. Students took the observations for $\frac{1}{3}$ deflection in the galvanometer. Which of the following is true for measuring the value of $G$?

Two moving coil galvanometers $A$ and $B$ having identical springs are placed in magnetic fields of $0.25 \ T$ and $0.5 \ T$ respectively. If the number of turns in $A$ and $B$ are respectively $36$ and $48$,and the areas of the coils $A$ and $B$ are $2.4 \times 10^{-3} \ m^2$ and $4.8 \times 10^{-3} \ m^2$ respectively,then the ratio of the current sensitivities of the galvanometers $A$ and $B$ is

$A$ $100\, \Omega$ galvanometer gives full-scale deflection at $10\, mA$. How much shunt is required to read $100\, mA$?