$A$ capacitor stores $60 \ \mu C$ charge when connected across a battery. When the gap between the plates is filled with a dielectric,a charge of $120 \ \mu C$ flows through the battery. If the initial capacitance of the capacitor was $2 \ \mu F$,the amount of heat produced when the dielectric is inserted is ... $\mu J$.

$A$ charged conductor produces an electric field of intensity $10^3 \ V/m$ just outside its surface in vacuum. Then,it produces an electric field of intensity $E$ just outside its surface,when it is placed in a medium of dielectric constant $4$. The value of $E$ will be (in $V/m$)

The expression for the capacity of the capacitor formed by compound dielectric placed between the plates of a parallel plate capacitor as shown in the figure,will be (area of plate $= A$)

$A$ parallel plate capacitor has a capacity $80 \times 10^{-6} \,F$, when air is present between the plates. The volume between the plates is then completely filled with a dielectric slab of dielectric constant $20$. The capacitor is now connected to a battery of $30 \,V$ by wires. The dielectric slab is then removed. Then, the charge that passes now through the wire is

Capacitance of a parallel plate capacitor becomes $4/3$ times its original value if a dielectric slab of thickness $t = d/2$ is inserted between the plates ($d$ is the separation between the plates). The dielectric constant of the slab is

$A$ parallel plate capacitor is made of two square parallel plates of area $A$,and separated by a distance $d << \sqrt{A}$. The capacitor is connected to a battery with potential $V$ and allowed to fully charge. The battery is then disconnected. $A$ square metal conducting slab also with area $A$ but thickness $d/2$ is then fully inserted between the plates,so that it is always parallel to the plates. How much work has been done on the metal slab by an external agent while it is being inserted?