A circular hole of radius frac{R}{4} is made | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The moment of inertia of the complete disc about point $O$ is $I_{total} = \frac{M R^2}{2}$.The radius of the removed disc is $r = \frac{R}{4}$.Si

Vedclass · Accepted Answer

$\frac{237 M R^2}{512}$

Vedclass · Answer

(B) The moment of inertia of the complete disc about point $O$ is $I_{total} = \frac{M R^2}{2}$.The radius of the removed disc is $r = \frac{R}{4}$.Since the disc is uniform,the mass is proportional to the area $(M \propto R^2)$. Therefore,the mass of the removed disc is $m = M \left( \frac{r}{R} \right)^2 = M \left( \frac{R/4}{R} \right)^2 = \frac{M}{16}$.The moment of inertia of the removed disc about its own central axis passing through $O'$ is $I_{cm} = \frac{1}{2} m r^2 = \frac{1}{2} \left( \frac{M}{16} \right) \left( \frac{R}{4} \right)^2 = \frac{M R^2}{512}$.Using the parallel axis theorem,the moment of inertia of the removed disc about point $O$ is $I_{removed} = I_{cm} + m d^2$,where $d = \frac{3R}{4}$ is the distance between $O$ and $O'$.$I_{removed} = \frac{M R^2}{512} + \left( \frac{M}{16} \right) \left( \frac{3R}{4} \right)^2 = \frac{M R^2}{512} + \frac{9 M R^2}{256} = \frac{M R^2 + 18 M R^2}{512} = \frac{19 M R^2}{512}$.The moment of inertia of the remaining portion is $I_{remaining} = I_{total} - I_{removed} = \frac{M R^2}{2} - \frac{19 M R^2}{512} = \frac{256 M R^2 - 19 M R^2}{512} = \frac{237 M R^2}{512}$.

$A$ circular hole of radius $\frac{R}{4}$ is made in a thin uniform disc having mass $M$ and radius $R$,as shown in the figure. The moment of inertia of the remaining portion of the disc about an axis passing through the point $O$ and perpendicular to the plane of the disc is:

Similar Questions

$A$ square plate of side $12 \ cm$ is shown in the figure. If a square of side $2 \ cm$ is cut from one of its corners,where will the center of mass of the remaining part be with respect to the center of the original square? The plate has uniform thickness and density.

$A$ circular plate of diameter '$a$' is kept in contact with a square plate of side '$a$' as shown. The density of the material and the thickness are same everywhere. The centre of mass of the composite system will be ...........

From a circular disc of radius $R$,a triangular portion is cut as shown in the figure. The distance of the center of mass $(COM)$ of the remaining disc from the center of the disc $O$ is:

$A$ carpenter has constructed a toy as shown in the adjoining figure. If the density of the material of the sphere is $12$ times that of the cone,the position of the centre of mass of the toy is given by

In the figure shown,find the distance of the centre of mass of a system of a uniform circular plate of radius $3R$ from $O$,in which a hole of radius $R$ is cut whose centre is at a distance of $2R$ from the centre of the large circular plate.

Vedclass Test Series

Exam Paper Generator

Online Exam Module