$A$ conducting rod $AB$ of length $l$ is projected on a frictionless frame $PSRQ$ with velocity $v_0$ in a uniform magnetic field $\vec{B}$ directed into the plane. The velocity of the rod after time $t$ is

$A$ long rectangular conducting loop of width '$l$',mass '$m$',and resistance '$R$' is placed partly in a perpendicular magnetic field '$B$'. With what velocity should it be pushed downwards so that it may continue to fall without any acceleration? ($g = $ acceleration due to gravity)

$A$ rod closing the circuit shown in the figure moves along a $U$-shaped wire at a constant speed $v$ under the action of a force $F$. The circuit is in a uniform magnetic field perpendicular to the plane. Calculate $F$ if the rate of heat generation in the circuit is $Q$.

The horizontal component of the earth's magnetic field at a place is $3 \times 10^{-4} \, T$ and the angle of dip is $53^\circ$. $A$ metal rod of length $0.25 \, m$ is placed in the north-south position and is moved at a constant speed of $10 \, cm/s$ towards the east. The emf induced in the rod will be ...... $\mu V$. (Given $\tan 53^\circ = 4/3$)

$A$ wheel with $10$ spokes,each of length $L \ m$,is rotated with a uniform angular velocity $\omega$ in a plane normal to a magnetic field $B$. What is the emf induced between the axle and the rim of the wheel?

$A$ conducting rod $PQ$ of length $L = 1.0\, m$ is moving with a uniform speed $v = 2\, m/s$ in a uniform magnetic field $B = 4.0\, T$ directed into the paper. $A$ capacitor of capacity $C = 10\,\mu F$ is connected as shown in the figure. Then