A cuboid ABCDEFGH is anisotropic with alpha_x | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) For an anisotropic material,the coefficient of superficial expansion $\beta$ for a face is the sum of the linear expansion coefficients along the

Vedclass · Accepted Answer

$\beta_{CDEH} = 3 	imes 10^{-5} /^{\circ}C$

Vedclass · Answer

(C) For an anisotropic material,the coefficient of superficial expansion $\beta$ for a face is the sum of the linear expansion coefficients along the two axes defining that face.Given: $\alpha_x = 1 	imes 10^{-5} /^{\circ}C$,$\alpha_y = 2 	imes 10^{-5} /^{\circ}C$,$\alpha_z = 3 	imes 10^{-5} /^{\circ}C$.From the figure,face $CDEH$ lies in the $xy$-plane (assuming $D$ is at origin or aligned with axes as per standard orientation).Specifically,face $CDEH$ is defined by the $x$ and $y$ axes.Therefore,$\beta_{CDEH} = \alpha_x + \alpha_y = (1 + 2) 	imes 10^{-5} /^{\circ}C = 3 	imes 10^{-5} /^{\circ}C$.Thus,option $C$ is correct.

$A$ cuboid $ABCDEFGH$ is anisotropic with $\alpha_x = 1 \times 10^{-5} /^{\circ}C$,$\alpha_y = 2 \times 10^{-5} /^{\circ}C$,$\alpha_z = 3 \times 10^{-5} /^{\circ}C$. The coefficient of superficial expansion of the faces can be:

Similar Questions

When a copper sphere is heated,in which of the following will the maximum percentage change be observed?

$A$ bar of iron is $10 \, cm$ at $20^{\circ}C$. At $19^{\circ}C$ it will be ($\alpha$ of iron $= 11 \times 10^{-6}/^{\circ}C$)

$A$ bimetallic strip is made of aluminium and steel $(\alpha_{Al} > \alpha_{\text{steel}})$. On heating,the strip will

What must be the lengths of steel and copper rods at $0^o C$ for the difference in their lengths to be $10\,cm$ at any common temperature? $(\alpha_{steel}=1.2 \times 10^{-5} \;^o C^{-1})$ and $(\alpha_{copper} = 1.8 \times 10^{-5} \;^o C^{-1})$

Two rods of same area of cross-section have lengths $L$ and $2 \,L$ and coefficients of linear expansion $2 \alpha$ and $\alpha$ respectively. If they are welded to form a composite rod of length $3 \,L$, then the coefficient of linear expansion of the composite rod is

Vedclass Test Series

Exam Paper Generator

Online Exam Module