$A$ galvanometer can be used as a voltmeter by connecting a

The resistivity of a potentiometer wire is $40 \times 10^{-8} \, \Omega \cdot m$ and its area of cross-section is $8 \times 10^{-6} \, m^2$. If $0.2 \, A$ current is flowing through the wire,the potential gradient will be:

$A$ potentiometer wire has length $10\, m$ and resistance $20\,\Omega$. $A$ $2.5\, V$ battery of negligible internal resistance is connected across the wire with an $80\,\Omega$ series resistance. The potential gradient on the wire will be

$A$ Daniel cell is balanced on $125\,cm$ length of a potentiometer wire. Now the cell is short-circuited by a resistance $2\,\Omega$ and the balance is obtained at $100\,cm$. The internal resistance of the Daniel cell is .............. $\Omega$.

In the arrangement shown in the figure,when the switch $S_2$ is open,the galvanometer shows no deflection for $l = L/2$. When the switch $S_2$ is closed,the galvanometer shows no deflection for $l = 5L/12$. The internal resistance $(r)$ of the $6\, V$ cell and the $emf$ $E$ of the other battery are respectively:

In the figure,the potentiometer wire of length $l = 100 \, cm$ and resistance $R = 9 \, \Omega$ is joined to a cell of emf $E_1 = 10 \, V$ and internal resistance $r_1 = 1 \, \Omega$. Another cell of emf $E_2 = 5 \, V$ and internal resistance $r_2 = 2 \, \Omega$ is connected as shown. The galvanometer $G$ will show no deflection when the length $AC$ is ............... $cm$.