$A$ homogeneous disc with a radius $0.2\, m$ and mass $5\, kg$ rotates around an axis passing through its centre. The angular velocity of the rotation of the disc as a function of time is given by the formula $\omega = 2 + 6t$. The tangential force applied to the rim of the disc is ........ $N.$

$A$ non-uniform rod $OA$ of linear mass density $\lambda = \lambda_0 x$ (where $\lambda_0$ is a constant) is suspended from the ceiling with a hinge joint at $O$ and a light string as shown in the figure. Find the angular acceleration of the rod just after the string is cut.

$A$ uniform disc of mass $5\,g$ and radius $1\,cm$ is fixed to a thin stick $AB$ of negligible mass as shown in the figure. The system is initially at rest. The constant torque,that will make the system rotate about $AB$ at $25$ rotations per second in $5\,s$,is close to:

$A$ wheel has a moment of inertia $5 \times 10^{-3} \, kg \, m^2$ and is making $20 \, rev/sec$. The torque needed to stop it in $10 \, sec$ is $............. \times 10^{-2} \, N-m$. (in $\pi$)

The thin rod shown below has mass $M$ and length $L$. $A$ force $F$ acts at one end as shown,and the rod is free to rotate about the other end in the plane of the force. The initial angular acceleration of the rod is ........

$A$ pulley of radius $1.5\,m$ is rotated about its axis by a force $F = (12t - 3t^2)\,N$ applied tangentially (where $t$ is measured in seconds). If the moment of inertia of the pulley about its axis of rotation is $4.5\,kg\cdot m^2$,the number of rotations made by the pulley before its direction of motion is reversed will be $\frac{K}{\pi}$. The value of $K$ is $.....$