A metallic wire of length L is fixed between | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) When the wire is cooled,it tends to contract,but since it is fixed between rigid supports,a tension $F$ is developed in the wire.The thermal strai

Vedclass · Accepted Answer

$\sqrt{\frac{Y\alpha}{\rho}}$

Vedclass · Answer

(B) When the wire is cooled,it tends to contract,but since it is fixed between rigid supports,a tension $F$ is developed in the wire.The thermal strain $\alpha \Delta T$ is equal to the elastic strain $\frac{F}{AY}$.$\frac{F}{AY} = \alpha \Delta T \implies F = Y A \alpha \Delta T$The frequency of the fundamental mode of transverse vibration is given by $f = \frac{1}{2L} \sqrt{\frac{F}{\mu}}$,where $\mu$ is the mass per unit length.Since $\mu = \rho A$,we substitute $F$ and $\mu$ into the frequency formula:$f = \frac{1}{2L} \sqrt{\frac{Y A \alpha \Delta T}{\rho A}} = \frac{1}{2L} \sqrt{\frac{Y \alpha \Delta T}{\rho}}$Since $L, \Delta T$ are constants,$f \propto \sqrt{\frac{Y \alpha}{\rho}}$.

$A$ metallic wire of length $L$ is fixed between two rigid supports. If the wire is cooled through a temperature difference $\Delta T$ ($Y =$ Young's modulus,$\rho =$ density,$\alpha =$ coefficient of linear expansion),then the frequency of transverse vibration is proportional to:

Similar Questions

The length of a sonometer wire tuned to a frequency of $250 \ Hz$ is $0.60 \ m$. The frequency of the tuning fork with which the vibrating wire will be in tune when the length is made $0.40 \ m$ is .... $Hz$.

$A$ string on a musical instrument is $50 \ cm$ long and its fundamental frequency is $270 \ Hz$. If the desired frequency of $1000 \ Hz$ is to be produced,the required length of the string is .... $cm$.

$A$ wire of length $1 \,m$ under a certain initial tension emits a sound of fundamental frequency $256 \,Hz$. When the tension is increased by $1 \,kg \,wt$,the frequency of the fundamental note increases to $320 \,Hz$. The initial tension is ........... $kg \,wt$.

If you set up the ninth harmonic on a string fixed at both ends,its frequency compared to the seventh harmonic is:

$A$ sonometer wire of length $114\, cm$ is fixed at both the ends. Where should the two bridges be placed so as to divide the wire into three segments whose fundamental frequencies are in the ratio $1 : 3 : 4$?

Vedclass Test Series

Exam Paper Generator

Online Exam Module