$A$ moving coil galvanometer has a resistance of $50\,\Omega$ and it indicates full-scale deflection at a current of $4\,mA$. $A$ voltmeter is constructed using this galvanometer and a $5\,k\Omega$ series resistance. The maximum voltage that can be measured using this voltmeter will be close to ......$V$.

$A$ shunt of resistance $1\,\Omega$ is connected across a galvanometer of $120\,\Omega$ resistance. $A$ total current of $5.5\,A$ is passed through the combination,which gives full-scale deflection in the galvanometer. The current that would give full-scale deflection in the absence of the shunt is nearly ............... $A$.

The ratio of heats generated through shunt and galvanometer is $7: 5$ when they are connected to make an ammeter. If the resistance of the galvanometer is $112 \Omega$,then the resistance of the shunt is: (in $\Omega$)

$A$ galvanometer of resistance $20 \,\Omega$ is to be converted into an ammeter of range $1 \, A$. If a current of $1 \, mA$ produces full scale deflection,the shunt required for the purpose is ................ $\Omega $.

The current passing through the galvanometer is $4\%$ of the total current in the circuit. If the resistance of the galvanometer is $G$, the shunt resistance $S$ connected across the galvanometer is:

Two identical galvanometers are converted into a voltmeter and a millivoltmeter. As compared to the series resistance of the voltmeter,the series resistance of the millivoltmeter will be