A point moves with uniform acceleration and v | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Let $u_1, u_2, u_3, u_4$ be the velocities at times $t=0, t_1, (t_1+t_2)$ and $(t_1+t_2+t_3)$ respectively.Since acceleration $a$ is uniform,the a

Vedclass · Accepted Answer

$(v_1 - v_2) : (v_2 - v_3) = (t_1 + t_2) : (t_2 + t_3)$

Vedclass · Answer

(B) Let $u_1, u_2, u_3, u_4$ be the velocities at times $t=0, t_1, (t_1+t_2)$ and $(t_1+t_2+t_3)$ respectively.Since acceleration $a$ is uniform,the average velocity in an interval is the arithmetic mean of initial and final velocities.$v_1 = \frac{u_1 + u_2}{2}$,$v_2 = \frac{u_2 + u_3}{2}$,$v_3 = \frac{u_3 + u_4}{2}$.Using $v = u + at$:$u_2 = u_1 + at_1$$u_3 = u_2 + at_2 = u_1 + a(t_1 + t_2)$$u_4 = u_3 + at_3 = u_1 + a(t_1 + t_2 + t_3)$Now,$v_1 - v_2 = \frac{u_1 + u_2}{2} - \frac{u_2 + u_3}{2} = \frac{u_1 - u_3}{2} = \frac{u_1 - (u_1 + a(t_1 + t_2))}{2} = -\frac{a(t_1 + t_2)}{2}$.Similarly,$v_2 - v_3 = \frac{u_2 + u_3}{2} - \frac{u_3 + u_4}{2} = \frac{u_2 - u_4}{2} = \frac{(u_1 + at_1) - (u_1 + a(t_1 + t_2 + t_3))}{2} = -\frac{a(t_2 + t_3)}{2}$.Taking the ratio: $\frac{v_1 - v_2}{v_2 - v_3} = \frac{t_1 + t_2}{t_2 + t_3}$.

$A$ point moves with uniform acceleration and $v_1, v_2$ and $v_3$ denote the average velocities in the three successive intervals of time $t_1, t_2$ and $t_3$. Which of the following relations is correct?

Similar Questions

$A$ $2\,\mu F$ capacitor is charged as shown in the figure. The percentage of its stored energy dissipated after the switch $S$ is turned to position $2$ is.....$\%$

If $200 \text{ MeV}$ of energy is released in the fission of one nucleus of ${}_{92}^{236}U$,the number of nuclei that must undergo fission to release an energy of $1000 \text{ J}$ is

The particles emitted during the sequential radioactive decay of ${}^{238}U_{92}$ to ${}^{206}Pb_{82}$ are

The following series $L-C-R$ circuit,when driven by an emf source of angular frequency $70 \text{ krad/s}$,the circuit effectively behaves like:

The cubic unit cell of a metal (molar mass $= 63.55 \ g \ mol^{-1}$) has an edge length of $362 \ pm$. Its density is $8.92 \ g \ cm^{-3}$. The type of unit cell is

Vedclass Test Series

Exam Paper Generator

Online Exam Module