$A$ rigid uniform bar $AB$ of length $L$ is slipping from its vertical position on a frictionless floor (as shown in the figure). At some instant of time,the angle made by the bar with the vertical is $\theta$. Which of the following statements about its motion is/are correct?
$[A]$ The midpoint of the bar will fall vertically downward
$[B]$ The trajectory of the point $A$ is a parabola
$[C]$ Instantaneous torque about the point in contact with the floor is proportional to $\sin \theta$
$[D]$ When the bar makes an angle $\theta$ with the vertical,the displacement of its midpoint from the initial position is proportional to $(1-\cos \theta)$

$A$ solid sphere $(A)$ of mass $5m$ and a spherical shell $(B)$ of mass $m$, both having the same radius $R$, are placed on a rough surface. When a force $F$ of the same magnitude is applied tangentially at the highest points of $A$ and $B$, they start rolling without slipping with accelerations $a_A$ and $a_B$, respectively. The ratio of $a_A$ to $a_B$ is . . . . . . .

For the pivoted slender rod of length $l$ as shown in the figure,the angular velocity as the bar reaches the vertical position after being released from the horizontal position is:

$A$ solid sphere of radius $R$ has a moment of inertia $I$ about its geometric axis. It is melted and recast into a disc of radius $r$ and thickness $t$. If the moment of inertia of this disc about an axis tangent to its edge and perpendicular to its plane is also $I$,find the value of $r$.

Two discs $A$ and $B$ are mounted coaxially on a vertical axle. The discs have moments of inertia $I$ and $2I$ respectively about the common axis. Disc $A$ is imparted an initial angular velocity $2\omega$ using the entire potential energy of a spring compressed by a distance $x_1$. Disc $B$ is imparted an angular velocity $\omega$ by a spring having the same spring constant and compressed by a distance $x_2$. Both the discs rotate in the clockwise direction.
$1.$ The ratio of $x_1/x_2$ is
$(A)$ $2$ $(B)$ $1/2$ $(C)$ $\sqrt{2}$ $(D)$ $1/\sqrt{2}$
$2.$ When disc $B$ is brought in contact with disc $A$,they acquire a common angular velocity in time $t$. The average frictional torque on one disc by the other during this period is
$(A)$ $\frac{2I\omega}{3t}$ $(B)$ $\frac{9I\omega}{2t}$ $(C)$ $\frac{9I\omega}{4t}$ $(D)$ $\frac{3I\omega}{2t}$
$3.$ The loss of kinetic energy during the above process is
$(A)$ $\frac{I\omega^2}{2}$ $(B)$ $\frac{I\omega^2}{3}$ $(C)$ $\frac{I\omega^2}{4}$ $(D)$ $\frac{I\omega^2}{6}$

$A$ particle starts from the point $(0\,m, 8\,m)$ and moves with a uniform velocity of $3\, \hat{i} \,m/s$. After $5\,s$,the angular velocity of the particle about the origin will be: