A silver and a copper voltameter are connecte | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The mass deposited in a voltameter is given by Faraday's law of electrolysis: $m = Z i t$,where $m$ is the mass,$Z$ is the electrochemical equival

Vedclass · Accepted Answer

$16$

Vedclass · Answer

(D) The mass deposited in a voltameter is given by Faraday's law of electrolysis: $m = Z i t$,where $m$ is the mass,$Z$ is the electrochemical equivalent $(E.C.E.)$,$i$ is the current,and $t$ is the time.Given time $t = 0.5 	ext{ hours} = 1800\,s$.For the silver voltameter: $i_1 = \frac{m_1}{Z_1 t} = \frac{2}{1.118 	imes 10^{-3} 	imes 1800} \approx 0.994\,A$.For the copper voltameter: $i_2 = \frac{m_2}{Z_2 t} = \frac{1}{3.294 	imes 10^{-4} 	imes 1800} \approx 1.687\,A$.Since the voltameters are in parallel,the total current $I = i_1 + i_2 = 0.994 + 1.687 = 2.681\,A$.The power supplied by the battery is $P = V 	imes I = 6 	imes 2.681 \approx 16.086\,W$.Thus,the power is approximately $16\,W$.

Similar Questions

In the circuit diagram shown in the figure below, the current flowing through the resistance $3\, \Omega$ is $\frac{x}{3}\, A$. The value of $x$ is $...........$

If the cold junction is held at $0^{\circ} C$, the thermo emf $V$ of a thermocouple varies as $V = 10 \times 10^{-6} t - \frac{1}{40} \times 10^{-6} t^2$, where $t$ is the temperature of the hot junction in $^{\circ} C$. The neutral temperature and the maximum value of thermo emf are respectively:

Two electric bulbs marked $40\,W, 220\,V$ and $60\,W, 220\,V$ are connected in series across a $220\,V$ supply,resulting in an effective power $P_1$. When they are connected in parallel across the same $220\,V$ supply,the effective power is $P_2$. The ratio $\frac{P_1}{P_2}$ is:

The Peltier coefficient of a thermocouple is $2 \times 10^{-9} \, V$. How much heat is developed at a junction if a $2.5 \, A$ current flows for $2 \, min$?

In the circuit shown here,$E_1 = E_2 = E_3 = 2 \, V$ and $R_1 = R_2 = 4 \, \Omega$. The current flowing between points $A$ and $B$ through battery $E_2$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module