$A$ tank is filled up to a height $2H$ with a liquid and is placed on a platform of height $H$ from the ground. The distance $x$ from the ground where a small hole is punched to get the maximum range $R$ is:

$A$ vessel of area of cross-section $A$ has liquid to a height $H$. There is a hole at the bottom of the vessel having area of cross-section $a$. The time taken to decrease the level from $H_1$ to $H_2$ will be:

$A$ cylindrical tank has a hole of $1 \ cm^2$ in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of $70 \ cm^3/s$,then the maximum height up to which water can rise in the tank is: $(g = 9.8 \ m/s^2)$ (in $cm$)

$A$ large tank is filled with water (density $= 10^3 \ kg/m^3$). $A$ small hole is made at a depth $10 \ m$ below the water surface. The range of water issuing out of the hole is $R$ on the ground. What extra pressure must be applied on the water surface so that the range becomes $2R$? (Take $1 \ atm = 10^5 \ Pa$ and $g = 10 \ m/s^2$)

$A$ container of large uniform cross-sectional area $A$ is resting on a horizontal surface and holds two immiscible,non-viscous,and incompressible liquids of densities $d$ and $2d$,each of height $\frac{H}{2}$,as shown. The upper surface of the liquid with lower density is open to the atmosphere. $A$ small hole is made on the wall of the container at height $h$ $(h < \frac{H}{2})$. The initial speed of efflux of the liquid at the hole is:

State Torricelli's law.