A vertical hanging bar of length l and mass m | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top s

Vedclass · Accepted Answer

$\frac{Mg + mg(l-x)}{A}$

Vedclass · Answer

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top support,the tension in the bar is equal to the total weight acting below that point.The length of the bar below the point at distance $x$ is $(l-x)$.The mass of this portion of the bar is $m 	imes (l-x)$.The weight of this portion is $mg(l-x)$.The load $M$ at the bottom also contributes to the tension,with a weight of $Mg$.Therefore,the total tension $T$ at distance $x$ is $T = Mg + mg(l-x)$.The tensile stress $\sigma$ is given by $\sigma = \frac{T}{A} = \frac{Mg + mg(l-x)}{A}$.

$A$ vertical hanging bar of length $l$ and mass $m$ per unit length carries a load of mass $M$ at its lower end. Its upper end is clamped to a rigid support. The tensile stress at a distance $x$ from the support is (where $A$ is the area of cross-section of the bar):

Similar Questions

Two wires $A$ and $B$ are stretched by the same load. The radius of wire $A$ is double the radius of wire $B$. The stress on the wire $B$ as compared to the stress on the wire $A$ is

Two equal and opposite forces are exerted on a bar (rod) as shown in the figure. The plane $PQ$ makes an angle $\theta$ with the cross-section $PR$ (having area $a$). Find the tensile stress on the plane $PQ$.

$A$ wire of diameter $1\, mm$ breaks under a tension of $1000\, N.$ Another wire,of the same material as that of the first one,but of diameter $2\, mm$ breaks under a tension of ...... $N$.

If a load of $9 \, kg$ is suspended on a wire,the increase in length is $4.5 \, mm$. The force constant of the wire is

$Assertion:$ Stress is the internal restoring force per unit area of a body.
$Reason:$ Rubber is more elastic than steel.

Vedclass Test Series

Exam Paper Generator

Online Exam Module