$A$ wall has two layers $A$ and $B,$ each made of different material. Both the layers have the same thickness. The thermal conductivity for $A$ is twice that of $B$ and under steady condition,the temperature difference across the wall is $36\,^{\circ}C.$ The temperature difference across the layer $A$ is....... $^{\circ}C$

Two slabs $A$ and $B$ of equal surface area are placed one over the other such that their surfaces are completely in contact. The thickness of slab $A$ is twice that of $B$. The coefficient of thermal conductivity of slab $A$ is twice that of $B$. The first surface of slab $A$ is maintained at $100^{\circ} C$, while the second surface of slab $B$ is maintained at $25^{\circ} C$. The temperature at the contact of their surfaces is (in $^{\circ} C$)

$A$ temperature difference of $120\,^oC$ is maintained between the two ends of a uniform rod $AB$ of length $2L$. Another bent rod $PQ$,of the same cross-section as $AB$ and length $\frac{3L}{2}$,is connected across $AB$ as shown in the figure. In the steady state,the temperature difference between $P$ and $Q$ will be close to .......... $^oC$.

Two rods of same length and material transfer a given amount of heat in $12 \, s$ when they are joined end to end. But when they are joined lengthwise (parallel),they will transfer the same amount of heat under the same conditions in .......... $s$.

Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$

$A$ composite slab is made of two different metals of the same thickness,having thermal conductivities $K$ and $2K$. The equivalent thermal conductivity of the composite slab is: