An AC circuit having supply voltage E = 10 si | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The supply voltage is $E = 10 \sin \omega t$. The circuit is an $RL$ series circuit.The impedance of the circuit is $Z = \sqrt{R^2 + X_L^2} = \sqr

Vedclass · Accepted Answer

$4.8$

Vedclass · Answer

(C) The supply voltage is $E = 10 \sin \omega t$. The circuit is an $RL$ series circuit.The impedance of the circuit is $Z = \sqrt{R^2 + X_L^2} = \sqrt{3^2 + 4^2} = 5 \, \Omega$.The current in the circuit is given by $I = I_0 \sin(\omega t - \phi)$,where $I_0 = E_0 / Z = 10 / 5 = 2 \, 	ext{A}$ and $	an \phi = X_L / R = 4/3$,so $\phi = 	an^{-1}(4/3)$.The voltage across the inductor is $V_L = I X_L = (I_0 \sin(\omega t - \phi + \pi/2)) X_L = I_0 X_L \sin(\omega t - \phi + \pi/2)$.At $t = \pi / \omega$,the voltage across the inductor is $V_L = I_0 X_L \sin(\omega \cdot \frac{\pi}{\omega} - \phi + \frac{\pi}{2}) = I_0 X_L \sin(\pi - \phi + \frac{\pi}{2}) = I_0 X_L \sin(\frac{3\pi}{2} - \phi) = -I_0 X_L \cos \phi$.Since $\cos \phi = R / Z = 3 / 5 = 0.6$,we have $V_L = -(2)(4)(0.6) = -4.8 \, 	ext{V}$.The magnitude of the voltage across the inductor is $|V_L| = 4.8 \, 	ext{V}$.

An $AC$ circuit having supply voltage $E = 10 \sin \omega t$ consists of a resistor of resistance $R = 3 \Omega$ and an inductor of reactance $X_L = 4 \Omega$ as shown in the figure. The voltage across the inductor at $t = \pi / \omega$ is: (in $\text{ V}$)

Similar Questions

In a series $LCR$ circuit,$R=300 \Omega$,$L=0.9 \text{ H}$,$C=2 \mu\text{F}$,and $\omega=1000 \text{ rad/s}$. The impedance of the circuit is: (in $\Omega$)

If $L$ and $R$ are respectively the inductance and resistance,then the dimensions of $\frac{R}{L}$ will be

In the circuit given below,the current through the inductor is $0.6 \,A$ and through the capacitor is $0.9 \,A$. The current drawn from the a.c. source is (in $\,A$)

$A$ $12\,\Omega$ resistor and a $0.21\,H$ inductor are connected in series to an $ac$ source operating at $20\,V$,$50\,Hz$. The phase angle between the current and the source voltage is.....$^o$

In an $LCR$ series circuit,if ${X_C} < {X_L}$ and ${X_C} > {X_L}$,determine whether the current in the circuit leads or lags the voltage.

Vedclass Test Series

Exam Paper Generator

Online Exam Module