An inductor (L = 100 mH),a resistor (R = 100 | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Initially,when steady state is achieved,the current in the circuit is $i_0 = \frac{E}{R} = \frac{100 \ V}{100 \ \Omega} = 1 \ A$.When the battery

Vedclass · Accepted Answer

$\frac{1}{e} \ A$

Vedclass · Answer

(A) Initially,when steady state is achieved,the current in the circuit is $i_0 = \frac{E}{R} = \frac{100 \ V}{100 \ \Omega} = 1 \ A$.When the battery is disconnected and points $A$ and $B$ are short-circuited,the circuit becomes an $LR$ decay circuit.The equation for the decay of current is given by $i(t) = i_0 e^{-\frac{R}{L}t}$.Given $R = 100 \ \Omega$,$L = 100 \ mH = 0.1 \ H$,and $t = 1 \ ms = 10^{-3} \ s$.The time constant of the circuit is $	au = \frac{L}{R} = \frac{0.1 \ H}{100 \ \Omega} = 10^{-3} \ s$.Substituting the values into the decay equation:$i(t) = 1 	imes e^{-\frac{10^{-3}}{10^{-3}}} = 1 	imes e^{-1} = \frac{1}{e} \ A$.

Similar Questions

Two $L-R$ circuits are shown in the figure. Based on the given current-time graph,select the correct relation between the inductances $L_1$ and $L_2$.

In the circuit shown in the figure, what is the value of $I_1$ just after pressing the key $K$?

In an $LR$ circuit,the time constant is the time in which the current grows from zero to the value (where ${I_0}$ is the steady-state current):

The figure shows an $L-R$ circuit. When the switch $S$ is closed,the currents through resistors $R_1, R_2$ and $R_3$ are $I_1, I_2$ and $I_3$ respectively. The values of $I_1, I_2$ and $I_3$ at $t=0 \, s$ are:

Vedclass Test Series

Exam Paper Generator

Online Exam Module