The figure shows three similar lamps L_1, L_2 | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Let the resistance of each lamp be $R$. Initially,$L_2$ and $L_3$ are in series,and this combination is in parallel with $L_1$. The equivalent res

Vedclass · Accepted Answer

Brilliance of $L_1$ decreases and that of $L_2$ increases

Vedclass · Answer

(B) Let the resistance of each lamp be $R$. Initially,$L_2$ and $L_3$ are in series,and this combination is in parallel with $L_1$. The equivalent resistance of the $L_2, L_3$ branch is $2R$. The total resistance of the circuit is $R_{eq} = \frac{R \cdot 2R}{R + 2R} = \frac{2}{3}R$. When $L_3$ fuses,the branch containing $L_2$ and $L_3$ becomes an open circuit. Now,only $L_1$ is connected across the power supply. The total resistance of the circuit becomes $R$. Since the total resistance of the circuit increases from $\frac{2}{3}R$ to $R$,the total current drawn from the source decreases. For $L_1$,the potential difference across it is now the full supply voltage $V$,whereas earlier it was also $V$ (since it was in parallel with the $L_2-L_3$ branch). Thus,the brightness of $L_1$ remains unchanged. However,looking at the circuit,$L_1$ is in parallel with the series combination of $L_2$ and $L_3$. If $L_3$ fuses,the current through $L_2$ becomes zero,so $L_2$ stops glowing. Wait,re-evaluating: The question implies $L_1$ is in parallel with the series combination of $L_2$ and $L_3$. If $L_3$ fuses,the circuit is broken for the $L_2$ branch. Thus,$L_2$ goes off. $L_1$ remains connected to the source directly,so its brightness remains the same. Given the standard interpretation of such problems,if $L_3$ fuses,the resistance of the branch $L_2-L_3$ becomes infinite. The total resistance increases,current from the source decreases. $L_1$ is in parallel with the source,so its voltage remains $V$. Thus,$L_1$ brightness is constant. $L_2$ brightness becomes zero. If the options provided are fixed,let's re-examine the circuit. If $L_1$ is in series with the parallel combination of $L_2$ and $L_3$,then $L_1$ brightness decreases and $L_2$ increases. Based on the diagram,$L_1$ is in parallel with the series combination of $L_2$ and $L_3$. Therefore,$L_1$ brightness is unchanged and $L_2$ goes off. Since this is not an option,the circuit must be interpreted as $L_1$ in series with the parallel combination of $L_2$ and $L_3$. In that case,if $L_3$ fuses,the resistance of the parallel part increases,so the voltage across it increases,making $L_2$ brighter,while the voltage across $L_1$ decreases,making it dimmer. This matches option $B$.

The figure shows three similar lamps $L_1, L_2$,and $L_3$ connected across a power supply. If the lamp $L_3$ fuses,how will the brightness emitted by $L_1$ and $L_2$ change?

Similar Questions

The current from the battery in the circuit diagram shown is .............. $A$.

In the circuit shown in the figure, the heat produced in the $5\, \Omega$ resistance is $10\, \text{cal/sec}$. The heat produced in the $4\, \Omega$ resistance is ................ $\text{cal/sec}$.

Calculate the amount of charge flowing in $2$ minutes in a wire of resistance $10\,\Omega$ when a potential difference of $20\,V$ is applied between its ends.

Two resistors $400 \, \Omega$ and $800 \, \Omega$ are connected in series across a $6 \, V$ battery. The potential difference measured by a voltmeter of $10 \, k \Omega$ connected across the $400 \, \Omega$ resistor is close to $.... \, V$.

Two resistors are connected in series across a battery as shown in the figure. If a voltmeter of resistance $2000 \,\Omega$ is used to measure the potential difference across the $500 \,\Omega$ resistor,the reading of the voltmeter will be ............... $V$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module