For the AC circuit shown below,the phase diff | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) In the given circuit,the current leads the voltage,which indicates that it is an $RC$ circuit. Therefore,$P$ is a resistor and $Q$ is a capacitor.

Vedclass · Accepted Answer

$1 	ext{ k}\Omega, 10 \mu	ext{F}$

Vedclass · Answer

(A) In the given circuit,the current leads the voltage,which indicates that it is an $RC$ circuit. Therefore,$P$ is a resistor and $Q$ is a capacitor.For an $RC$ circuit,the impedance $Z$ is given by $Z = \sqrt{R^2 + X_C^2}$.The phase difference $\phi$ is given by $	an \phi = \frac{X_C}{R}$.Given $\phi = \frac{\pi}{4}$,we have $	an(\frac{\pi}{4}) = 1$,which implies $X_C = R$.Given $Z = 1414 \Omega \approx 1000\sqrt{2} \Omega$.Substituting $X_C = R$ into the impedance formula: $Z = \sqrt{R^2 + R^2} = R\sqrt{2}$.Thus,$R\sqrt{2} = 1000\sqrt{2} \implies R = 1000 \Omega = 1 	ext{ k}\Omega$.Since $X_C = R = 1000 \Omega$ and $X_C = \frac{1}{\omega C}$,assuming $\omega = 100 	ext{ rad/s}$ (standard for such problems):$C = \frac{1}{\omega X_C} = \frac{1}{100 	imes 1000} = 10^{-5} 	ext{ F} = 10 \mu	ext{F}$.Therefore,$P = 1 	ext{ k}\Omega$ and $Q = 10 \mu	ext{F}$.

For the $AC$ circuit shown below,the phase difference between emf and current is $\frac{\pi}{4}$ radian as shown in the graph. If the impedance of the circuit is $1414 \Omega$,then the values of $P$ and $Q$ are

Similar Questions

An e.m.f. $E = E_{0} \sin \omega t$ is applied to a circuit containing $L$ and $R$ in series. If $X_{L} = R$,then the power dissipated in the circuit is

When a coil is connected across a $20 \ V$ $DC$ supply,it draws a current of $5 \ A$. When it is connected across a $20 \ V, 50 \ Hz$ $AC$ supply,it draws a current of $4 \ A$. The self-inductance of the coil is .............. $mH$. (Take $\pi=3$)

In a series $CR$ circuit shown in the figure,the applied voltage is $10 \, V$ and the voltage across the capacitor is found to be $8 \, V$. Then the voltage across $R$,and the phase difference between the current and the applied voltage will respectively be:

When $100\, V$ $DC$ is applied across a solenoid,a current of $1\, A$ flows in it. When $100\, V$ $AC$ is applied across the same coil,the current drops to $0.5\, A$. If the frequency of the $AC$ source is $50\, Hz$,the impedance and inductance of the solenoid are:

An inductance of $0.2 \ H$ and resistance of $100 \ \Omega$ are connected in series to an $AC$ of $180 \ V$,$50 \ Hz$ supply. The $RMS$ current flowing in the circuit will be . . . . . . (Take $\pi^2$ as $10$). (in $A$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module