If an ammeter is to be used in place of a galvanometer,then we must connect:

An ammeter has a range of $1 \, A$ without a shunt. The range can be varied by using different shunt resistances. The graph between shunt resistance $(S)$ and range $(I)$ will have the nature of which curve shown in the figure?

$A$ galvanometer whose resistance is $120 \, \Omega$ gives full-scale deflection with a current of $0.05 \, A$. To enable it to read a maximum current of $10 \, A$,a shunt resistance is added in parallel with it. The resistance of the ammeter so formed is .............. $\Omega$.

$A$ student connects a voltmeter,an ammeter,and a resistor as shown in the circuit. If the voltmeter reading is $20 \ V$ and the ammeter reading is $4 \ A$,then the resistance $R$ will be:

$A$ moving coil galvanometer has $100$ turns and each turn has an area of $2.0 \,cm^2$. The magnetic field produced by the magnet is $0.01 \,T$ and the deflection in the coil is $0.05$ radian when a current of $10 \,mA$ is passed through it. The torsional constant of the suspension wire is $x \times 10^{-5} \,N-m / rad$. The value of $x$ is . . . . . . .

$A$ moving coil galvanometer has $150$ equal divisions. Its current sensitivity is $10$ divisions per milliampere and voltage sensitivity is $2$ divisions per millivolt. In order that each division reads $1 \, V$,the resistance in $\Omega$ needed to be connected in series with the coil will be