In a common base mode of a transistor,the collector current is $5.488 \ mA$ for an emitter current of $5.60 \ mA$. The value of the base current amplification factor $(\beta)$ will be

In an $NPN$ transistor,$10^{8}$ electrons enter the emitter in $10^{-8} \ s$. If $1\%$ of electrons are lost in the base,the fraction of current that enters the collector and the current amplification factor are respectively:

Identify the terminals of this $BJT$ and the type of $BJT$ $(NPN$ or $PNP)$. The multimeter is set to diode test mode (indicated by the symbol),and the black probe is connected to the $COM$ port while the red probe is connected to the $V\Omega$ port. Based on the connections shown in the image,determine the terminal configuration (from left to right) and the transistor type.

In case of a bipolar transistor, $\beta = 45$. The potential drop across the collector resistance of $1 \ k\Omega$ is $5 \ V$. The base current is approximately: (in $\mu A$)

An $N-P-N$ transistor in a common emitter mode is used as a simple voltage amplifier with a collector current of $4 \ mA$. The terminal of an $8 \ V$ battery is connected to the collector through a load resistance $R_L$ and to the base through a resistance $R_B$. The collector-emitter voltage $V_{CE} = 4 \ V$,base-emitter voltage $V_{BE} = 0.6 \ V$ and base current amplification factor $\beta_{d.c.} = 100$. Calculate the values of $R_L$ and $R_B$.

When $NPN$ transistor is used as an amplifier,