In a meter bridge,the balancing length from the left end (standard resistance of $1 \, \Omega$ is in the right gap) is found to be $20 \, cm$. The value of the unknown resistance is ............... $\Omega$.

In a meter bridge experiment, the balance point from the left is $37.5 \ cm$. The ratio of the right gap resistance to the left gap resistance is

The figure shows a rough sketch of a meter bridge. The galvanometer $(G)$ shows zero deflection at a length $l \, cm$. Now,$R_1$ and $R_2$ are interchanged,and the balancing length increases by $25 \, cm$. Find the ratio $R_1/R_2$.

$A$ meter bridge setup is shown in the figure. It is used to determine an unknown resistance $R$ using a given resistor of $15\,\Omega$. The galvanometer $(G)$ shows null deflection when the tapping key is at the $43\,cm$ mark from end $A$. If the end correction for end $A$ is $2\,cm$ and for end $B$ is $1\,cm$,then the determined value of $R$ will be . . . . . . $\Omega$.

In a meter bridge experiment,the balance point is obtained if the gaps are closed by $2 \Omega$ and $3 \Omega$ resistors. $A$ shunt of $X \Omega$ is added to the $3 \Omega$ resistor to shift the null point by $22.5 \text{ cm}$. The value of $X$ is: (in $\Omega$)

$A$ resistance of $20 \Omega$ is connected in the left gap of a metre bridge and an unknown resistance greater than $20 \Omega$ is connected in the right gap. When these resistances are interchanged,the balance point shifts by $20 \text{ cm}$. The unknown resistance is (in $\Omega$)