In a step-up transformer,the transformation ratio is $4:1$. If a Leclanche cell having an $EMF$ of $1.5 \ V$ is connected to the primary coil of the transformer,then the voltage obtained across its secondary coil is . . . . . . .

$A$ current of $5 \,A$ is flowing at $220 \,V$ in the primary coil of a transformer. If the voltage produced in the secondary coil is $2200 \,V$ and $50 \%$ of power is lost, then the current in the secondary will be (in $A$)

The primary coil of a transformer is connected to a $220 \,V$ $AC$ source. The number of turns in the primary and secondary coils are $100$ and $10$ respectively. The secondary coil is connected to two resistors in series as shown in the figure. The output voltage $\left(V_0\right)$ is: (in $\,V$)

$A$ step-up transformer operates on a $230 \ V$ line and a load current of $2 \ A$. The ratio of primary and secondary windings is $1:25$. Then the current in the primary is (in $A$)

$A$ step-up transformer operates on $220 \,V$ and supplies a current of $2 \,A$. The ratio of primary and secondary windings is $1:20$. The current in the primary is (in $\,A$)

$A$ transformer may be used to provide maximum power transfer between two $AC$ circuits that have different impedances $Z_1$ and $Z_2$. The ratio of turns $N_1/N_2$ needed to meet this condition is given by :-