In a meter bridge experiment for measuring an unknown resistance '$S$',the null point is obtained at a distance of $30 \ cm$ from the left side,as shown at point $D$. If $R$ is $5.6 \ k\Omega$,then the value of the unknown resistance '$S$' will be $\Omega$.

$A$ meter bridge is set up as shown to determine the end corrections at $A$ and $B$. When a resistance of $15\,\Omega$ is used in the left gap and $20\,\Omega$ in the right gap,the null point is obtained at a distance of $42\,cm$ from $A$. When these resistances are interchanged,the null point is obtained at a distance of $57\,cm$ from $A$. The values of the end corrections are:

In a meter bridge,the null point is located at $20 \ cm$ from the left end of the wire when resistances $R$ and $S$ are connected in the left and right gaps respectively. If the resistance $S$ is shunted with $60 \ \Omega$ resistance,the null point shifts by $5 \ cm$. The values of $R$ and $S$ are respectively:

The meter bridge shown is in a balanced position with $\frac{P}{Q} = \frac{l_{1}}{l_{2}}$. If we now interchange the positions of the galvanometer and the cell,will the bridge work? If yes,what will be the balance condition?

Two known resistances are connected in two gaps of a meter bridge. The null point is obtained at $20 \ cm$ from the zero end. $A$ resistance of $15 \ \Omega$ is connected in series with the smaller of the two. The null point shifts to $40 \ cm$. The smaller resistance is (in $\Omega$)

In an experiment to determine the temperature coefficient of resistance of a conductor,a coil of wire $X$ is immersed in a liquid. It is heated by an external agent. $A$ meter bridge setup is used to determine the resistance of the coil $X$ at different temperatures. The balancing points measured at temperatures $t_1=0^{\circ} C$ and $t_2=100^{\circ} C$ are $50 \ cm$ and $60 \ cm$ respectively. If the standard resistance taken out is $S=4 \ \Omega$ in both trials,the temperature coefficient of the coil is