In a steady state, the graph between temperature $(\theta)$ and distance $(x)$ from the hot end is:

On heating one end of a rod,the temperature of the whole rod will be uniform when

On a cold morning,a metal surface will feel colder to touch than a wooden surface because

If $K_{1}$ and $K_{2}$ are the thermal conductivities,$L_{1}$ and $L_{2}$ are the lengths,and $A_{1}$ and $A_{2}$ are the cross-sectional areas of steel and copper rods respectively,such that $\frac{K_{2}}{K_{1}}=9$,$\frac{A_{1}}{A_{2}}=2$,and $\frac{L_{1}}{L_{2}}=2$. For the arrangement shown in the figure,the value of the temperature $T$ of the steel-copper junction in the steady state will be ........... $^{\circ}C$.

The temperature difference between two sides of a metal plate,$3 \ cm$ thick,is $15^{\circ} C$. Heat is transmitted through the plate at the rate of $900 \ kcal$ per minute per $m^2$ at steady state. The thermal conductivity of the metal is:

The rate of heat conduction through a cylindrical rod is $Q_1$. The temperatures at the ends of the rod are $T_1$ and $T_2$. If all the dimensions of the rod are doubled while keeping the temperatures the same,the new rate of heat conduction is $Q_2$. Then: