In the following circuit,an $AC$ input $V_i(t) = (20 \text{ mV}) \sin(10^5 t)$ is applied at the left end. The amplitude of the output voltage $V_0$ at the right end across the capacitor will be (in $mV$)

An inductance coil has a resistance of $100 \Omega$. When an $A.C.$ signal of frequency $100 \ Hz$ is applied to the coil,the voltage leads the current by $45^{\circ}$. The inductance of the coil in henry is $\left[\sin 45^{\circ}=\cos 45^{\circ}=\frac{1}{\sqrt{2}}\right]$

An a.c. source of $15 \, V, 50 \, Hz$ is connected across an inductor $(L)$ and resistance $(R)$ in series. The $R.M.S.$ current of $0.5 \, A$ flows in the circuit. The phase difference between the applied voltage and current is $\left(\frac{\pi}{3}\right)$ radian. The value of resistance $(R)$ is $\left(\tan 60^{\circ}=\sqrt{3}\right)$. (in $\Omega$)

In an $LCR$ series circuit,if $V$ is the effective value of the applied voltage,$V_R$ is the voltage across $R$,and $V_L$ and $V_C$ are the effective voltages across $L$ and $C$ respectively,then:

$A$ series $LCR$ circuit consists of $R = 80\,\Omega$,$X_{L} = 100\,\Omega$,and $X_{C} = 40\,\Omega$. The input voltage is $V = 2500 \cos(100\pi t)\,V$. The amplitude of current in the circuit is $................A$.

An inductor of inductive reactance $R$,a capacitor of capacitive reactance $2R$,and a resistor of resistance $R$ are connected in series to an $AC$ source. The power factor of the series $LCR$ circuit is