In the given Wheatstone bridge circuit,the cu | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) First,we check if the Wheatstone bridge is balanced. The condition for a balanced bridge is $\frac{P}{Q} = \frac{R}{S}$.Here,$P = 5 \Omega$,$Q = 1

Vedclass · Accepted Answer

$I_2$

Vedclass · Answer

(D) First,we check if the Wheatstone bridge is balanced. The condition for a balanced bridge is $\frac{P}{Q} = \frac{R}{S}$.Here,$P = 5 \Omega$,$Q = 10 \Omega$,$R = 20 \Omega$,and $S = 40 \Omega$.Calculating the ratios: $\frac{P}{Q} = \frac{5}{10} = 0.5$ and $\frac{R}{S} = \frac{20}{40} = 0.5$.Since $\frac{P}{Q} = \frac{R}{S}$,the bridge is balanced.In a balanced Wheatstone bridge,no current flows through the galvanometer $(I_g = 0)$.Applying Kirchhoff's Current Law at junction $D$,the current entering the $40 \Omega$ resistor is the same as the current $I_2$ flowing through the $20 \Omega$ resistor,as no current is diverted through the galvanometer branch.Therefore,the current through the $40 \Omega$ resistor is $I_2$.

In the given Wheatstone bridge circuit,the current flowing through the $40 \Omega$ resistor is:

Similar Questions

The figure shows a network of four resistances and three batteries. Choose the correct alternative.

$A$ Wheatstone bridge is used to determine the value of an unknown resistance $X$ by adjusting the variable resistance $Y$ as shown in the figure. For the most precise measurement of $X$,the resistances $P$ and $Q$:

As shown in the circuit,if a conducting wire is connected between points $A$ and $B$,then the electric current in this wire will flow:

In the circuit shown in the given figure,the resistances $R_1$ and $R_2$ are respectively:

In the following network, the current flowing through $15 \text{ } \Omega$ resistance is (in $\text{ A}$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module