Match the following:Column IColumn IIA. Hooke | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The correct matches are as follows:$A$. Hooke's law: Within the elastic limit, stress is directly proportional to strain. Thus, $A-3$.$B$. Shearin

Vedclass · Accepted Answer

$A-3, B-1, C-4, D-2$

Vedclass · Answer

(C) The correct matches are as follows:$A$. Hooke's law: Within the elastic limit, stress is directly proportional to strain. Thus, $A-3$.$B$. Shearing strain: It is defined as the angle in radians through which a plane perpendicular to the fixed surface of a cubical body gets turned under the effect of a tangential force. It is also known as tangential strain. Thus, $B-1$.$C$. Bulk strain: For a solid, the bulk strain (volumetric strain) is equal to $3$ times the linear strain. Thus, $C-4$.$D$. Elastic fatigue: The temporary loss of elastic properties due to the action of repeated alternating deforming forces is called elastic fatigue. Thus, $D-2$.Therefore, the correct matching is $A-3, B-1, C-4, D-2$, which corresponds to option $C$.

Column $I$	Column $II$
$A$. Hooke's law	$1$. Tangential strain
$B$. Shearing strain	$2$. Temporary loss of elastic property
$C$. Bulk strain	$3$. Elastic limit
$D$. Elastic fatigue	$4$. $3$ times the linear strain

Match the following:
Column $I$ Column $II$
$A$. Hooke's law $1$. Tangential strain
$B$. Shearing strain $2$. Temporary loss of elastic property
$C$. Bulk strain $3$. Elastic limit
$D$. Elastic fatigue $4$. $3$ times the linear strain

Similar Questions

$A$ spring is stretched by applying a load to its free end. The strain produced in the spring is

Two identical steel cubes (masses $50\,g$,side $1\,cm$) collide head-on face to face with a speed of $10\,cm/s$ each. Find the maximum compression of each. Young's modulus for steel $Y = 2 \times 10^{11}\,N/m^2$.

What is buckling? What should be the shape of a rod for preventing buckling?

Two blocks of masses $1 \,kg$ and $2 \,kg$ are connected by a metal wire going over a smooth pulley. The breaking stress of metal is $\frac{40}{3 \pi} \times 10^6 \,N m^{-2}$. What should be the minimum radius of the wire used if it should not break (in $mm$)? $(g = 10 \,m s^{-2})$

For the tensile stress on the cross-section $PQRS$ to be maximum,$\theta =$ ......... $^o$

Vedclass Test Series

Exam Paper Generator

Online Exam Module

Match the following:Column $I$Column $II$$A$. Hooke's law$1$. Tangential strain$B$. Shearing strain$2$. Temporary loss of elastic property$C$. Bulk strain$3$. Elastic limit$D$. Elastic fatigue$4$. $3$ times the linear strain