Match the type of elasticity involved:
System Type of Elasticity $(i)$ Suspension fibre of galvanometer $(a)$ Linear $(ii)$ Bending of beam $(b)$ Shear $(iii)$ Cutting piece of paper $(c)$ Bulk $(iv)$ Mechanical waves in fluid $(d)$ Shear
| System | Type of Elasticity |
|---|---|
| $(i)$ Suspension fibre of galvanometer | $(a)$ Linear |
| $(ii)$ Bending of beam | $(b)$ Shear |
| $(iii)$ Cutting piece of paper | $(c)$ Bulk |
| $(iv)$ Mechanical waves in fluid | $(d)$ Shear |
- A$(i)-a, (ii)-b, (iii)-b, (iv)-c$
- B$(i)-b, (ii)-a, (iii)-d, (iv)-c$
- C$(i)-a, (ii)-b, (iii)-d, (iv)-c$
- D$(i)-c, (ii)-a, (iii)-d, (iv)-c$
Explore More
Similar Questions
The density and breaking stress of a wire are $6 \times 10^4 \ kg/m^3$ and $1.2 \times 10^8 \ N/m^2$ respectively. The wire is suspended from a rigid support on a planet where acceleration due to gravity is $\frac{1}{3}$ of the value on the surface of Earth. The maximum length of the wire without breaking is ............ $m$ (take $g = 10 \ m/s^2$ on Earth).
DifficultJEE MAIN 2024
View SolutionCopper has a face-centered cubic $(fcc)$ lattice with an interatomic spacing equal to $2.54 \ \mathring{A}$. The value of the lattice constant for this lattice is .... $\mathring{A}$ $[AIPMT \ 2005]$
Difficult
View SolutionAn elevator cable can have a maximum stress of $7 \times 10^7\,N/m^2$ for appropriate safety factors. Its maximum upward acceleration is $1.5\,m/s^2$. If the cable has to support the total weight of $2000\,kg$ of a loaded elevator,the minimum area of cross-section of the cable should be ....... $cm^2$ $(g = 10\,m/s^2)$.
Difficult
View Solution$A$ wire can be broken by applying a load of $200\, N$. The force required to break another wire of the same length and same material,but double in diameter,is .......... $N$.
Medium
View Solution$A$ light rod of length $200\,cm$ is suspended from the ceiling horizontally by means of two vertical wires of equal length tied to its ends. One of the wires is made of steel and has a cross-section of $0.1\,cm^2$,and the other is made of brass with a cross-section of $0.2\,cm^2$. At what distance from the steel wire should a weight be hung along the rod to produce equal stresses in both wires?
Difficult
View SolutionVedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo