How does the melting point of ice change with increasing pressure?

The vertical limbs of a $U$ shaped tube are filled with a liquid of density $\rho$ up to a height $h$ on each side. The horizontal portion of the $U$ tube having length $2h$ contains a liquid of density $2\rho$. The $U$ tube is moved horizontally with an acceleration $g/2$ parallel to the horizontal arm. The difference in heights in liquid levels in the two vertical limbs,at steady state,will be:

$A$ cylindrical capillary tube of $0.2 \ mm$ radius is made by joining two capillaries $T_1$ and $T_2$ of different materials having water contact angles of $0^{\circ}$ and $60^{\circ}$,respectively. The capillary tube is dipped vertically in water in two different configurations,case $I$ and $II$ as shown in the figure. Which of the following option$(s)$ is(are) correct?
(Surface tension of water $= 0.075 \ N/m$,density of water $= 1000 \ kg/m^3$,take $g = 10 \ m/s^2$)
$(1)$ The correction in the height of the water column raised in the tube,due to the weight of water contained in the meniscus,will be different for both cases.
$(2)$ For case $I$,if the capillary joint is $5 \ cm$ above the water surface,the height of the water column raised in the tube will be more than $8.75 \ cm$. (Neglect the weight of the water in the meniscus)
$(3)$ For case $I$,if the joint is kept at $8 \ cm$ above the water surface,the height of the water column in the tube will be $7.5 \ cm$. (Neglect the weight of the water in the meniscus)
$(4)$ For case $II$,if the capillary joint is $5 \ cm$ above the water surface,the height of the water column raised in the tube will be $3.75 \ cm$. (Neglect the weight of the water in the meniscus)

$A$ liquid is kept in a cylindrical vessel which is being rotated about a vertical axis through the centre of the circular base. If the radius of the vessel is $r$ and the angular velocity of rotation is $\omega$,then the difference in the heights of the liquid at the centre of the vessel and the edge is

An incompressible liquid is kept in a container having a weightless piston with a hole. $A$ capillary tube of inner radius $0.1 \,mm$ is dipped vertically into the liquid through the airtight piston hole,as shown in the figure. The air in the container is isothermally compressed from its original volume $V_0$ to $\frac{100}{101} V_0$ with the movable piston. Considering air as an ideal gas,the height $(h)$ of the liquid column in the capillary above the liquid level in $cm$ is. . . . . . .
[Given: Surface tension of the liquid is $0.075 \,N \,m^{-1}$,atmospheric pressure is $10^5 \,N \,m^{-2}$,acceleration due to gravity $(g)$ is $10 \,m \,s^{-2}$,density of the liquid is $10^3 \,kg \,m^{-3}$ and contact angle of capillary surface with the liquid is zero]

An open cubical tank was initially fully filled with water. When the tank was accelerated on a horizontal plane along one of its sides,it was found that one-third of the volume of water spilled out. The acceleration was: