The $(\tau - \theta)$ graph for a current-carrying coil in a magnetic field is:

$A$ circular coil of $30$ turns and radius $8.0\, cm$ carrying a current of $6.0\, A$ is suspended vertically in a uniform horizontal magnetic field of magnitude $1.0\, T$. The field lines make an angle of $60^o$ with the normal of the coil. Calculate the magnitude of the counter torque that must be applied to prevent the coil from turning. (in $, Nm$)

The figure below shows the north and south poles of a permanent magnet in which an $n$-turn coil of cross-sectional area $A$ is placed. When a current $i$ is passed through the coil,the plane of the coil makes an angle $\theta$ with respect to the direction of the magnetic field $B$. The torque on the coil is:

Write an expression for the torque acting on a current-carrying loop suspended in a uniform magnetic field.

$A$ circular coil of radius $4\, cm$ has $50$ turns. In this coil,a current of $2\, A$ is flowing. It is placed in a magnetic field of $0.1\, Wb/m^2$. The amount of work done in rotating it through $180^\circ$ from its equilibrium position will be ........ $J$.

$A$ solenoid of length $0.4 \ m$ and having $500$ turns of wire carries a current $3 \ A$. $A$ thin coil having $10$ turns of wire and radius $0.1 \ m$ carries current $0.4 \ A$. The torque required to hold the coil in the middle of the solenoid with its axis perpendicular to the axis of the solenoid is $(\mu_0 = 4\pi \times 10^{-7} \ SI \ units, \pi^2 = 10, \sin 90^{\circ} = 1)$.