The SI unit of inductance,the henry,cannot be | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The formula for inductance $L$ is given by $\phi = LI$,where $\phi$ is magnetic flux and $I$ is current. Thus,$L = \phi / I$. The unit of magnetic

Vedclass · Accepted Answer

$ohm-meter$

Vedclass · Answer

(D) The formula for inductance $L$ is given by $\phi = LI$,where $\phi$ is magnetic flux and $I$ is current. Thus,$L = \phi / I$. The unit of magnetic flux is $weber$ $(Wb)$ and current is $ampere$ $(A)$. So,$1 \ henry = 1 \ Wb/A$. This matches option $A$.Since $V = -L(dI/dt)$,we have $L = V(dt/dI)$. The units are $volt \cdot second / ampere$. This matches option $B$.The energy stored in an inductor is $U = (1/2)LI^2$,so $L = 2U/I^2$. The unit of energy is $joule$ $(J)$. So,$1 \ henry = 1 \ J/A^2$. This matches option $C$.Option $D$,$ohm-meter$,is the unit of resistivity,not inductance. Therefore,the henry cannot be written as $ohm-meter$.

The $SI$ unit of inductance,the henry,cannot be written as:

Similar Questions

The self-induced $emf$ of a coil is $25\,V$. When the current in it is changed at a uniform rate from $10\,A$ to $25\,A$ in $1\,s$,the change in the energy stored in the inductor is......$J$.

$A$ copper wire is wound on a wooden frame,whose shape is that of an equilateral triangle. If the linear dimension of each side of the frame is increased by a factor of $3$,keeping the number of turns of the coil per unit length of the frame the same,then the self-inductance of the coil:

$A$ graph of magnetic flux $(\Phi)$ versus current $(I)$ is shown for four inductors $A, B, C, D$. The smallest value of self-inductance is for inductor:

The self-inductance of a solenoid of length $31.4 \ cm$,area of cross-section $10^{-3} \ m^2$ having a total number of turns $500$ will be nearly $\left[\mu_0 = 4 \pi \times 10^{-7} \ SI \ unit\right]$.

The total number of turns and cross-section area in a solenoid are fixed. However,its length $L$ is varied by adjusting the separation between windings. The inductance of the solenoid will be proportional to

Vedclass Test Series

Exam Paper Generator

Online Exam Module